Table of Contents
Advertisement
Figure 6. Shelf installed in rack
1 - Shelf
2 - 10-32 x .63 in.(1.60 cm) Phillips screw with washers
Note: For rails with round holes, use the clip nuts on the front rails for securing 10-32 screws. For
rails with square holes, use the retainer nuts.
5. Install the air duct assembly (refer to the following figure) by inserting it down into the side-slot on
the shelf. Ensure that the tabs of the duct align and engage with the slots in the shelf.
23
Mounting the Device
Advertisement
Table of Contents
