Installing The Power Cords - Fujitsu Oracle M10-1 Service Manual

Figure 6-8 Levers on chassis
6.1.6

Installing the power cords

If the power cord has been removed for maintenance, reinstall the power cord, and
then replace the cable clamp.
Note - In the case of a dual power feed, connect the power cords in their original positions by
referring to the record that you made before the start of maintenance.
1. Insert the power cord all the way straight into the power supply unit
74 Fujitsu M10-1/SPARC M10-1 Service Manual ･ June 2021