7.4.2
System-stopped removal
This section describes the workflows for system-stopped/hot and system-stopped/
cold FRU removal. References to detailed descriptions are written in the workflow.
See any of them as required.
System-stopped removal on the SPARC M10-1 has the following patterns:
System-stopped/hot removal (for an internal disk)
■
System-stopped/cold removal (for memory)
■
System-stopped/cold removal
■
System-stopped/hot removal (for an internal disk)
System-stopped/hot removal can be performed on an internal disk. Perform the
following procedure to remove the unit.
Chapter 7 Maintenance Flow
113