Accessing The Cable Kit; Removing The Cable Kit - Fujitsu Oracle M10-1 Service Manual

Caution - Before you handle any components, wear a wrist strap to ground any static
electricity. If you perform this procedure without a wrist strap, individual
components or the overall system may be damaged. For details, see
on Static
13.3.1

Accessing the cable kit

Remove all the power supply units.
1.
For details, see
2. Pull the chassis out of the rack.
For details, see
3. Open the fan cover.
For details, see
Remove the upper cover.
4.
For details, see
Remove the air duct and the PSU backplane cover.
5.
For details, see
13.3.2

Removing the cable kit

Remove the three (3) cables from the motherboard unit that connect the PSU
1.
backplane to the motherboard unit.
Note - Record the positions of the cables before removing them to ensure that they are
reinstalled correctly.
Electricity."
"11.3 Removing a Power Supply
"5.8.3 Pulling the chassis out from the
"5.8.4 Opening the fan
"5.8.5 Removing the upper
"5.8.6 Removing the air duct and PSU backplane
Unit."
rack."
cover."
cover."
Chapter 13 Maintaining the Cable Kit
"1.4 Precautions
cover."
165