1.2
Labels/Tags
This section describes the labels and tags attached to the chassis.
Observe the precautions of the standard labels attached to the chassis when
performing maintenance.
Caution - Do not remove the labels or tags.
Note - The contents of the labels and tags described here may differ from those that are
actually affixed to the chassis.
The system name plate label (A in
■
number, manufacture date, rated voltage/current, number of phases, frequency,
and weight required for maintenance and management.
The standard label (B in
■
- Safety: NRTL/C, BIS
- Radio wave: VCCI-A, FCC-A, ICES, and KCC
- Safety and radio wave: CE, CCC, BSMI, RCM, and EAC
Figure 1-1 Location of the system name plate label and standard label
The RFID tag carries an Asset ID. The RFID tag is affixed to the operation panel.
■
2
Fujitsu M10-1/SPARC M10-1 Service Manual ・ June 2021
Figure
1-1) describes the model number, serial
Figure
1-1) describes the following certification standards.
B
A