Installing The Hdd Backplane - Fujitsu Oracle M10-1 Service Manual

Figure 10-5 Hooks on the chassis
6. Remove the HDD backplane.
Note - Place the removed HDD backplane on a grounded antistatic ESD mat.
10.4

Installing the HDD Backplane

This section describes the procedure for installing the HDD backplane.
10.4.1 Installing the HDD backplane
This section describes the procedure for installing the HDD backplane.
Install the HDD backplane by aligning the notches on both sides.
1.
140 Fujitsu M10-1/SPARC M10-1 Service Manual ･ June 2021