Pull the levers on the right and left side of the chassis outward to release the
1.
lock holding the chassis.
Figure 5-3 Levers on the right and left sides
While pulling the levers outward, pull the chassis out as far as possible.
2.
Once the chassis has been completely pulled out, it is automatically locked into
the prescribed position.
Figure 5-4 Pulling out the chassis
5.8.4
Opening the fan cover
To perform maintenance on an internal FRU in a chassis, pull the chassis out of the
rack, and then open the fan cover.
Turn the locking screw to the Service position (
1.
) to release the lock.
Chapter 5 Preparations Required for Maintenance
61