Removing Memory - Fujitsu Oracle M10-1 Service Manual

16.5.2

Removing memory

This section describes the procedure for removing memory. Perform reduction using
the same procedure.
When replacing the motherboard unit, the memory should be removed from the old
unit and remounted on the new unit. Mount the memory in the same memory
mounting location as that before replacement.
To remove memory, see
Caution - Before you handle any components, wear a wrist strap to ground any static
electricity. If you perform this procedure without a wrist strap, individual
components or the overall system may be damaged. For details, see
on Static
Move the latch of the memory slot outward, and then remove the memory by
1.
pulling it straight up.
Note - Make a note of the mounting locations of memory before removing them to ensure
that they are reinstalled correctly.
Note - Place the removed memory on a grounded antistatic ESD mat.
192 Fujitsu M10-1/SPARC M10-1 Service Manual ･ June 2021
"2.2 Checking the Memory Configuration
Electricity."
Rules."
"1.4 Precautions