Accessing A Pcie Card; Removing A Pci Express Riser - Fujitsu Oracle M10-1 Service Manual

Caution - Before you handle any components, wear a wrist strap to ground any static
electricity. If you perform this procedure without a wrist strap, individual
components or the overall system may be damaged. For details, see
on Static
8.3.1

Accessing a PCIe card

Disconnect all the cables connected to the PCIe card requiring maintenance.
1.
Note - Record the positions of the cables before removing them to ensure that they are
reinstalled correctly.
2. Pull the chassis out of the rack.
For details, see
Open the fan cover.
3.
For details, see
Remove the upper cover.
4.
For details, see
8.3.2

Removing a PCI Express riser

1. Hold the PCIe riser at two points and remove it.
Note - Place the removed PCIe riser on the grounded antistatic ESD mat.
Electricity."
"5.8.3 Pulling the chassis out from the
"5.8.4 Opening the fan
"5.8.5 Removing the upper
rack."
cover."
cover."
Chapter 8 Maintaining the PCI Express Cards
"1.4 Precautions
123