Accessing A Fan Unit; Removing A Fan Unit - Fujitsu Oracle M10-1 Service Manual

Caution - Before you handle any components, wear a wrist strap to ground any static
electricity. If you perform this procedure without a wrist strap, individual
components or the overall system may be damaged. For details, see
on Static
15.3.1

Accessing a fan unit

Pull the chassis out of the rack.
1.
For details, see
2. Open the fan cover.
For details, see
15.3.2

Removing a fan unit

Pinch the front and rear faces of the fan unit to be replaced, and pull it up to
1.
remove it.
Note - Place the removed fan unit on a grounded antistatic ESD mat.
Electricity."
"5.8.3 Pulling the chassis out from the
"5.8.4 Opening the fan
rack."
cover."
Chapter 15 Maintaining the Fan Units
"1.4 Precautions
183