Wire Connection Chart For Serial Cables; Usb Port; Sas Port - Fujitsu Oracle M10-1 Service Manual

D.1.1

Wire connection chart for serial cables

Figure D-1 Wire connection chart for serial cables
D.2

USB Port

Table D-2
Table D-2 USB port
Pin arrangement
D.3

SAS Port

The SAS port is used to connect external devices with an SAS interface, such as a tape
drive. The chassis has one SAS port on the rear.
Consult a service engineer about compatible equipment.
236 Fujitsu M10-1/SPARC M10-1 Service Manual ･ June 2021
lists the specifications of the USB port.
Pin
number
1
2
3
4
Signal Input/output
name
VBUS Output
-DATA Input/
output
+DATA Input/
output
GND ---
Description
Power supply
Data
Data
Ground