Installing The Operation Panel; Restoring The Chassis - Fujitsu Oracle M10-1 Service Manual

14.4.1

Installing the operation panel

Change the mode switch of the operation panel to Service mode.
1.
Place the operation panel at the mounting location, and then run the cables
2.
from the front of the chassis and insert them.
3. Push the operation panel firmly into place.
Note - Confirm that the operation panel has been securely installed and fixed.
4. Connect the two cables from the operation panel to the motherboard unit.
Note - Connect the cables in their original positions by referring to the record that you made
before the start of maintenance.
Note - When connecting the cables, insert them firmly. If there is a loose connection, the
motherboard unit will be unable to access the operation panel, resulting in an XSCF startup
error.
Figure 14-4 Operation panel cables
14.4.2

Restoring the chassis

1. Install the upper cover.
For details, see
Close the fan cover.
2.
"6.1.3 Installing the upper
Chapter 14 Maintaining the Operation Panel
cover."
179