Removing A Power Supply Unit; Accessing A Power Supply Unit - Fujitsu Oracle M10-1 Service Manual

Figure 11-1 Location of power supply unit
(1)
Location number
1
2
11.3

Removing a Power Supply Unit

This section describes the procedure for removing a power supply unit.
Enable removal of the power supply unit before attempting to remove it. For details,
see "Chapter 7 Maintenance
Caution - Before you handle any components, wear a wrist strap to ground any static
electricity. If you perform this procedure without a wrist strap, individual
components or the overall system may be damaged. For details, see
on Static
11.3.1

Accessing a power supply unit

1. Release the cable management arm.
Release the lock by pressing the cable management arm tab (A in
toward the outside of the chassis to unlock the cable management arm.
146 Fujitsu M10-1/SPARC M10-1 Service Manual ･ June 2021
(2)
Component
Power supply unit (PSU#0)
Power supply unit (PSU#1)
Electricity."
Flow."
"1.4 Precautions
Figure 11-2)