Removing The Operation Panel; Accessing The Operation Panel - Fujitsu Oracle M10-1 Service Manual

Figure 14-1 Location of the operation panel
Location number
1
14.3

Removing the Operation Panel

This section describes the procedure for removing the operation panel.
Enable the removal of the operation panel before attempting to remove it. For details,
see "Chapter 7 Maintenance
Caution - Before you handle any components, wear a wrist strap to ground any static
electricity. If you perform this procedure without a wrist strap, individual
components or the overall system may be damaged. For details, see
on Static
14.3.1

Accessing the operation panel

Pull the chassis out of the rack.
1.
For details, see
Open the fan cover.
2.
For details, see
3. Remove the upper cover.
For details, see
176 Fujitsu M10-1/SPARC M10-1 Service Manual ･ June 2021
Component
Operation panel (OPNL)
Flow."
Electricity."
"5.8.3 Pulling the chassis out from the
"5.8.4 Opening the fan
"5.8.5 Removing the upper
rack."
cover."
cover."
(1)
"1.4 Precautions