Caution - Do not forcibly push the power supply unit into its slot. Using excessive
force may damage the component or the chassis.
Push the power supply unit firmly into place at the mounting location.
2.
Note - Make sure that the power supply unit is firmly inserted and fixed.
11.4.2
Restoring the chassis
Connect the power cord to the power supply unit requiring maintenance.
1.
For details, see
Close the cable management arm.
2.
Note - Check that the cable management arm is locked with its tab (A in
Figure 11-4 Cable management arm tab
A
The FRU installation work is completed. See
continue maintenance work.
"6.1.6 Installing the power
Chapter 11 Maintaining the Power Supply Units
cords."
Figure
"Chapter 7 Maintenance
11-4).
Flow" to
149