Machine head
4.6.4 Setting the sewing foot stroke relative to the needle bar stroke
Fig. 38: Setting the sewing foot stroke relative to the needle bar stroke
(1) - Lever
(2) - Lifting gear
(3) - Eccentric
Proper setting
The lifting gear (2) must be switched on so that it performs a stroke.
The stop block (6) must then lie against the right hand stop screw (5).
Service Instructions 911-211 - 02.0 - 10/2016
WARNING
Risk of injury from moving parts!
Crushing possible.
Always use the greatest care when testing and
setting the sewing foot stroke relative to the needle
bar stroke.
①
②
③
④
(4) - Sewing foot stroke
(5) - Stop screw
(6) - Stop block
⑥
⑤
52