Removing And Installing The Feed Dog - DURKOPP ADLER H-Type 969 Service Instructions Manual

3.3.9 Removing and installing the feed dog

Fig. 9: Removing and installing the feed dog
①
(1) - Feed dog carrier
(2) - Screws
Removing the feed dog
1. Remove the throat plate ( p. 15).
2. Loosen the screws (2).
3. Take the feed dog (3) off the feed dog carrier (1).
Installing the feed dog
1. Place the feed dog (3) on the feed dog carrier (1) and lightly tighten the
2. Install the throat plate ( p. 15)
3. Adjust the feed dog (3) so that it has an equal amount of play on both
4. Tighten the screws (2).
16
WARNING
Risk of injury!
Risk of crushing injuries and stab wounds from
sharp and moving parts.
Switch the machine off before you remove or install
the feed dog.
screws (2).
sides when inside the throat plate.
Basic Principles of Working with the Machine
③
②
(3) - Feed dog
Service Instructions 969 - 01.0 - 12/2015