Tilting The Machine Head Up - DURKOPP ADLER 745-34 Speedpocket Operating Instructions Manual

2.3

Tilting the machine head up

For maintenance work the machine head can be tilted up.
For this purpose the transport carriage must be in its rear position.
Caution: Danger of injury!
Switch the main switch off.
Tilt the machine head up only with the main switch turned off.
Tilting the machine head up
–
Remove the covering hood 1.
For this purpose lift the covering hood at the front so that the
locking is released. Lift the covering hood off carefully.
–
Swing the folding station 2 out by 90°.
–
Swivel the locking lever 4 up.
–
Lift the fabric sliding sheet 3 at the front and swivel it to the left.
–
Lift the machine head in the area of the head cover and tilt it up
carefully until catch 5 locks. The latch snaps in additionally.
The space under the machine table is accessible for cleaning work.
Swinging the machine head back
–
Lift catch 5.
–
Swing the machine head back carefully.
Caution: Danger of injury!
Hold the machine head tight until it is completely at rest when lowered.
Danger of squashing your fingers between machine head and table
top.
–
Insert the fabric sliding sheet.
–
Swivel the locking lever 4 down.
–
Tilt the folding station 2 back and insert it.
–
Put the covering hood 1 on again.
1
13