Tilting And Re-Erecting The Machine Head - DURKOPP ADLER 610-10 Service Instructions Manual

3.2.1 Tilting and re-erecting the machine head

To access the components on the underside of the machine, swivel up the
machine head.
Fig. 1: Tilting and re-erecting the machine head
(1) - Machine head
(2) - Support
Tilting the machine head
To tilt the machine head:
1. Use the handle (3) to tilt the machine head (1) up to the support (2).
Erecting the machine head
To erect the machine head:
1. Carefully erect the machine head (1) using the handle (3).
14
①
②
(3) - Handle
Service Instructions 610-10/630-10 - 01.0 - 12/2016
Working basis
③