6.4 Servicing specific components
Checking the toothed belt
The condition of the toothed belt must be checked once a month.
Important
A damaged toothed belt must be replaced immediately.
Proper setting
The toothed belt exhibits no cracks or fragile areas.
When pressed with a finger, the toothed belt must yield no more than
10 mm.
6.5 Parts list
A parts list can be ordered from Dürkopp Adler. Or visit our website for
further information at:
www.duerkopp-adler.com
96
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before checking the
condition of the toothed belt.
Operating Instructions 911-210-10 - 00.0 - 06/2020
Maintenance