Ricoh SP 8400DN Field Service Manual page 307

29. Check the movement at the paper edge from the leading to trailing edges, and turn the adjusting screws of
the correction plate to adjust the internal multi-fold unit's position until the deviation stays within 2
markings on the scale. (Each marking represents 1 mm.)
•
[A]: When the paper edge shifts towards the front, turn the adjusting screw clockwise.
•
[B]: When the paper edge shifts towards the rear, turn the adjusting screw counterclockwise.
30. After registration, tighten the coin screw [A] to secure the internal multi-fold unit.
When you fully open the front cover of the internal multi-fold unit, it may interfere with the machine's
upper front cover, causing the internal multi-fold unit to become misaligned. Therefore, tighten the screw
[A] with a stubby screwdriver.
Internal Multi-fold Unit FD3000 (M482-17)
125