LCIT PB3260 (M496-17, -27)
SP descriptions
•
SP1-002 (Side-to-Side Registration)
Adjusts the side-to-side registration by changing the laser main scan start position for each mode and tray.
Increasing a value: The image is moved towards the rear edge of the paper.
Decreasing a value: The image is moved towards the front edge of the paper.
Changing the paper size
Paper size is set as shown below when the machine is shipped from the factory.
•
NA: LT LEF
•
EU, AA: A4 LEF
The paper size can be changed to A4 or LT.
1.
Pull out the left tray and right tray.
2.
Remove the screws on the right tray side fences (front [A], rear [B]) and right tray end fence [C] (
3.
Remove the screws on the left tray side fences (front [A], rear [B]).
72
×3).