Information Display - Precor Experience 600 Series Service Manual

CLUB SETTINGS
REMOTE SPEED
CONTROL
AUTO STOP
CONFIGURE
(1)
MAINT CONFIG
SET CUSTOM
PROGRAM 1/2
(1) Only used on products that have the ASL feature. Not included on the EFX600 series,
the TRM600 series, or the
(2) Custom option not included on all consoles.

Information Display (65)

Service Access Code: 65 (see
Provides the equipment usage, hardware, software, error code, and maintenance inform-
ation.
INFORMATION DISPLAY
ODOMETER
HOUR METER
1
TRM800 version 1 treadmills mfg. dates 2010 thru 2014.
2
TRM800 version 1 treadmills mfg. dates 2010 thru 2014.
3
Printed circuit assembly, generally referred to as either an upper PCA or lower PCA.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Not used.
Automatically stops the machine if an exerciser is not detected.
Sets Auto Stop to On or Off.
Default: ON
(ASL equipped models only)
Enable/disable the ASL pulsing blue light maintenance counter
reminder function:
ON - Enable
l
OFF - Disable
l
Sets the use of a customized workout program.
Range: ON/OFF
Default: OFF
Note: The Total Body Workout can only be turned on in this Club
Settings menu.
1
TRM800-10 (TRM10
"Service Menu Access Codes" on page
The total number of accumulated miles on the unit.
This value is stored in the upper
if the PCA is replaced the accumulated miles would start
again from "0".
The total number of hours that the unit took to accu-
mulate unit miles.
This value is stored in the upper PCA in the console so if
4 Standard Service Menus
LED Console Standard Service Menus
DESCRIPTION
2
/GEN06) series products.
DESCRIPTION
PCA
27)
3
in the console so
Page 40