Precor Experience 600 Series Service Manual page 134

5. Reinstall the Motor Controller, see
page 107.
1
6. Plug in the treadmill power cord and switch the power ON.
7. Clear the Error Lor or
a. On P10, P30, P30i and P31 consoles:
Hold down the PAUSE key to access the Error Log and select OK to view error
codes. Use the UP/DWN keys to scroll thru the error codes. Hold down QUICK
START to clear all error codes.
b. P62, P80, and P82 consoles:
Access the Service menu (51765761) > About > CPA Event Log, select
REFRESH and then CLEAR to remove all error codes.
8. Press QUICK START to start a manual workout. Make sure the fan is running, that
the air flows into the MC housing, and there are no error code 14 events.
Note: The fan will only run after the running belt is moving.
9. Reinstall the hood cover, see
10. Do the Operation Verification tests (see
return to service.
1
Device power cord connector or electrical cable male connector that is inserted into an
electrical receptacle "outlet" (also called the plug-in).
2
Touchscreen console Control Processing Assembly.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Motor Controller (MC) Replacement" on
2
CPA Event Log:
"Hood Cover Replacement" on page
"Operation Verification" on page
6 Replacement Procedures
Motor Controller Fan Replacement
82.
23) and
Page 124