Precor Experience 600 Series Service Manual page 78

4. Increase the speed to 6 mph (10 kph) verify tracking, then increase the speed to 9
mph (14 kph) verify tracking, and finally increase the speed to 12 mph (19 kph) and
verify tracking. Make sure that the tracking remains centered at each speed, make
small adjustments as needed.
5. Make sure that the treadmill is level and stable, adjust the two rear leveling feet as
necessary.
Note: An unlevel unstable treadmill can cause tracking issues with use.
6. Replace the left/right trim landing covers, see
page 80.
7. Replace the hood, see
8. Verify treadmill operation (see
vice.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Covers and Panels Replacement" on page
"Operation Verification" on page
5 Adjustment Procedures
Running Belt Tension and Tracking Adjustment
"Covers and Panels Replacement" on
23) and return to ser-
80.
Page 68