Precor Experience 600 Series Service Manual page 76

and right side tension in increments of 0.2 (0.2%) gauge divisions until the man-
ufacturer tension specification is reached.
Forbo brand running belt tension
Habasit brand running belt tension
Notes: * Referenced to gauge reading 3.0 (0.0%)
11. Remove the tension gauges.
Running belt alignment and tracking adjustment
CAUTION:
Video
RUNNING BELT ALIGNMENT PROCEDURE
What is a centered and properly tracking running belt
A properly centered belt does not mean that the belt is perfectly centered on the deck and
rollers. It is a belt that tracks steady and does not touch or rub the landing trim or any other
frame or hardware parts. Always attempt to position the belt as close as possible to the cen-
ter of the deck and rollers.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Running Belt
1) ONLY use hand tools for belt tracking adjustment
2) The tracking adjustments should only be done in 1/4 turn incre-
ments.
3) ONLY use the right side tension bolt to adjust tracking.
5 Adjustment Procedures
Running Belt Tension and Tracking Adjustment
Specification
3.55 (0.55%) *
3.70 - 3.80 (0.70% - 0.80%)*
Page 66