Information Display - Precor Experience 700 line Series Service Manual

CLUB SETTINGS
Note: * not available on all models.

Information Display (65)

Service Access Code: 65 (see
Provides the equipment usage, hardware, software, error code, and maintenance inform-
ation.
INFORMATION DISPLAY
ODOMETER
HOUR METER
(2)
BELT RATING
MAINT COUNTER
1
Printed circuit assembly, generally referred to as either an upper PCA or lower PCA.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Note: The Total Body Workout can only be turned on in this Club
Settings menu.
"Service Access Codes" on
The total number of accumulated miles on the unit.
This value is stored in the upper
the PCA is replaced the accumulated miles would start
again from "0".
The total number of hours that the unit took to accumulate
unit miles.
This value is stored in the upper PCA in the console so if
that PCA is replaced the hours of use would start again
from "0".
(Treadmills Only)
Displays the belt rating from 10 (best) to 0 (worst).
Belt rating ≤ 1 replace the running belt
ASL equipped machines: A belt rating of 0 or 1 will cause
a blue pulsing ASL light indicating that there is a problem
with the running belt/deck and requires servicing or
replacement.
Important: Reset the Belt Rating after replacing with a
new running belt and deck ( hold down QuickStart).
Provides machine next maintenance due remaining
mileage or hours. Perform preventative maintenance
when the maintenance counter reaches 0.
Press/Hold the PAUSE/RESET key to reset the counter
(treadmills reset to 1000 miles, ellipticals reset to 250
4 Standard Service Menus
LED Console Standard Service Menus
DESCRIPTION
page 22)
DESCRIPTION
1
PCA in the console so if
Page 34