Precor Experience 600 Series Service Manual page 139

measured distances are the same.
CAUTION: A misaligned drive belt can cause high pitch belt noises, damage to the
belt, and possible drive motor pulley or drive roller pulley hardware damage.
5. Tension the drive belt to specification, see
ment" on page 57.
Drive Belt
(1)
Condition
(1)
New
(1)
Used
(1) New belt tension applies to new belt first time installations. Used belt tension
applies to reinstalling an existing belt or re-tensioning an existing used belt.
6. Complete the running belt installation by verifying the running belt alignment and
tracking, see "Running belt alignment and tracking adjustment" on page
7. Reinstall the hood cover, see
8. Do the Operation Verification tests (see
return to service.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Drive Belt Tension and Alignment Adjust-
Drive Belt
Tension
110 lbs +/- 10 (50 kgs +/- 4.5)
85 lbs +/- 5 (39 kgs +/- 2)
"Covers and Panels Replacement" on page
"Operation Verification" on page
6 Replacement Procedures
Drive Belt Replacement
Verification Belt Tension
100-120 lbs (45-54 kgs)
80-90 lbs (36-41 kgs)
66.
80.
23) and
Page 129