Tools And Supplies - Precor Experience 600 Series Service Manual

Tools and Supplies

Tools and supplies required to complete the machine service and repair.
Tools
• US and Metric Hex Key set
• US and Metric socket set
• Us and Metric wrench set
• Cutters
• Rubber mallet
• Tape measure /Straight edge ruler
• DVM meter
• AC Clamp-on averting current meter
• ESD wrist strap and pad
• 12 " wonder bar
• 2 - Running Belt tension gauge – OTC
Tools Model #: 6673 (Precor PN:
PPP000000020007101)
Supplies
• Super Lube Gel with Teflon by Permatex
(1)
• Loctite 243 Blue Medium Strength Thread-
locker
• Cable tie assortment (1 3/4", 3", 4"
1
Torque is a measure of the force that can cause an object to rotate about an axis. Bolt/nut
example: 5 NM torque is equivalent to 5 newton's of force applied one meter from the center
of the bolt, 6 ft-lb is equivalent to 6 lbs of force applied 1 foot away from the center of the
bolt.
2
Heart Rate
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
• Standard straight slot tip screw drive set
• Philips tip screwdriver set
• US & metric Allen wrench set
• 7/16" Allen key, socket mounted
• Pliers
• Inner and outer snap ring pliers
1
• Torque Wrenches: 9 in lbs to 100 in - lbs
(83 ft-lbs)
• DVM Multimeter
2
• Compatible HR chest strap or Polar HRM
simulator xmitter (Precor PN:
PPP000000020045101)
• Vacuum cleaner (recommend ESD safe
model)
• Drive Belt tension Gauge (Kent-Moore BT-
33-73-F
• Cleaning rags
• Cleaner Degreaser (see
2 General Information
Tools and Supplies
"" on page 14)
Page 10