Precor Experience 600 Series Service Manual page 121

MC connector pin definitions
1
CONN
ID
INPUT
MOTOR DRIVE MOTOR AC PWR OUT
COMM CONSOLE INTERFACE CABLE
4 (1)
DBR DYNAMIC BRAKE RESISTOR
1
connector
2
Alternating Current: electric current which periodically reverses direction between positive
and negative polarity.
3
Emergency Stop: Safety clip and lanyard attached to the stop switch to immediately turn
off power bringing the treadmill to a stop.
4
treadmill dynamic break resistor.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
NAME
2
MC AC INPUT PWR
SENSE
6 Replacement Procedures
Motor Controller (MC) Replacement
PIN Description
1 EARTH GROUND
2 AC LINE 1- LINE AC
LINE
3 AC LINE 2- NEUTRAL
1 NC
2 NC
3 NC
4 BLACK MOTOR PHASE
5 WHITE MOTOR PHASE
6 RED MOTOR PHASE A
1 DIGITAL GROUND
2 +8 VDC
3 TCD DATA OUTPUT
4 DIGITAL GROUND
5 +8 VDC
6 RXD DATA INPUT
7 DIGITAL GROUND
8 E-STOP
1 THERMAL RESISTOR
SENSE
2 THERMAL RESISTOR
SENSE
B
C
3
Page 111