Specification Summary; Fastener Torque Specification; Calibration Specification - Precor Experience 600 Series Service Manual

lengths)
(1) or equivalent synthetic Teflon based grease (Mobil 1, NLGI 2 Teflon Synthetic
Grease).

Specification Summary

Fastener Torque Specification

System component fastener torque specification:
System Component
1
RF coax connector
Display mounting fasteners
Set screws
Plastite screw fasteners
Flathead screws
Deck front fasteners
Deck rear fasteners
Drive Motor fasteners

Calibration Specification

System calibration specification:
System Component
Lift Motor Jackscrew Calibration gap
Forbo Drive Belt Tension New Belt
Forbo Drive Belt Tension Used Belt
Forbo - Running Belt: tension gauge dial reading
(percent %)
1
Radio Frequency: Identifies electromagnetic signals with frequency spectrum between the
3 kHz (3,000 hertz) to 300 GHz (300 billion hertz) range.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
2.4 in-lbs (0.271 Nm)
180 in-lbs (20 Nm
300 in-lbs (34 Nm)
20 in-lbs (2.3 Nm)
25 in-lbs (2.8 Nm)
27-33 in-lbs (3.1-3.7 Nm)
50-55 in-lbs (5.6-(6.2 Nm)
204 in-lbs (17 ft-lbs, 23 N-m)
1 1/8 in - 1 3/16 in (2.8 cm - 3.0 cm)
(1)
100-120 lbs (45-54 kgs)
(1)
80-90 lbs (36-41 kgs)
3.55 (0.55%)
2 General Information
Specification Summary
Specification
Specification
(2)
Page 11