Precor Experience 600 Series Service Manual page 69

a. If the tension is not within the belt tension specification; continue procedure to
adjust the tension to specification.
b. If the belt tension is within the belt tension specification; verify the machine
operation and return to service, see
Belt Condition
New
Used
6. Place the belt tension gauge onto the Drive Belt mid distance between the drive motor
and drive roller pulleys.
7. Adjust the belt tension to specification:
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Drive Belt Tension and Alignment Adjustment
"Operation Verification" on page
Drive Belt Tension
100-120 lbs (45-54 kgs)
80-90 lbs (36-41 kgs)
5 Adjustment Procedures
23.
Page 59