Drive Belt Replacement; About; Procedure - Precor Experience 600 Series Service Manual

Drive Belt Replacement

About

This procedure provides instruction to remove and install the Drive Belt

Procedure

Review entire procedure before starting.
Removal Instructions
1. Switch the power OFF and
2. Remove the hood cover, see
3. Use a 5/16" hex key socket and ratchet to relax the running belt tension by alternately
loosening the left and right belt tension adjustment bolts in 1/4 turn increments. Use
this method to evenly remove the left and right belt tension. Do not use power tools
1
Disconnect a device power cord plug or cable connector from the power receptacle or out-
let.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
1
unplug the power cord.
"Covers and Panels Replacement" on page
6 Replacement Procedures
Drive Belt Replacement
80.
Page 125