Precor Experience 600 Series Service Manual page 129

1
5. Plug in the power cord and switch the power ON.
6. Wait for the console to power up and then clear the Error Log as follows:
On LED P10, P30, P30i and P31 consoles
a. Clear the Error Log of any stored error codes: Hold down PAUSE to access the
Error Log > select OK to view error codes, and then hold down QUICK START
to clear the Error Log of all error codes.
On touchscreen P62, P80, and P82 consoles
a. Access the service Settings menu (51765761), select About > CPA Event
Log. Then select the CLEAR softkey to clear the CPA Event Log.
b. Exit and return to the "Welcome" banner home page, select the Back softkey.
7. Reinstall the hood cover, see
8. Do the machine Operation Verification tests (see
and return to service.
1
Device power cord connector or electrical cable male connector that is inserted into an
electrical receptacle "outlet" (also called the plug-in).
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Hood Cover Replacement" on page
"Operation Verification" on page
6 Replacement Procedures
Motor Controller (MC) Replacement
82.
23)
Page 119