Precor Experience 600 Series Service Manual page 52

INFORMATION DISPLAY
METRICS BOARD SW
SER NUMBER
USAGE LOG
"Error Log & CPA Event Log"
on page 183
(1) Only used on products with the ASL feature. Not included on the EFX600 series, the
TRM600 series, or the TRM800-10 (TRM10/GEN06) series products.
(2) TRM600 series treadmills only.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
DESCRIPTION
The console Metrics board software version information
Shows the model and serial number of the machine. The
base serial number can be set using the WinCSAFE
computer software. The factory default is NONE.
Shows workout usage information for each individual
workout including the number of times and the total accu-
mulated time the workout was used.
Table of stored error event codes.
TIP: You can quickly access the Error log by holding
down the PAUSE key. Will show the STUCK KEY mes-
sage when there are no logged error codes.
4 Standard Service Menus
LED Console Standard Service Menus
Page 42