Installing The Wash Rack - Kodak HEALTH SCIENCES X-Omat M43 Installation Instructions Manual

Installing the WASH RACK

[1] Check that the following parts are seated correctly in the WASH RACK:
• ENTRANCE ROLLER ASSEMBLY
• 2 WASH TUBES
• O-RING on the WASH MANIFOLD
• EXIT ROLLER ASSEMBLY
Caution
Use care not to break off the SNAPS that hold the ENTRANCE ROLLER ASSEMBLY in position.
[2] Manually turn the DRIVE GEAR on the WASH RACK. Check that the ROLLERS turn easily and that the
GEARS engage.
Checking the Positions of the ENTRANCE ROLLER ASSEMBLY and EXIT ROLLER
Figure 34
ASSEMBLY on the WASH RACK
Wash
H130_0254BCA
Manifold
H130_0254BA
981088 – September 1995
Installing the RACKS
Tab
Upper Wash Tube
41