Table of Contents
Advertisement
[6] Check that the level of the solution in the FIXER TANK is at the top of the OVERFLOW WEIR.
If necessary, add more solution. See Figure 59 on Page 68.
[7] Install the fixer EVAPORATION COVER between the FIXER RACK and the WASH RACK. Position the
EVAPORATION COVER on the TIE RODS of the 2 RACKS as shown.
Installing the Fixer EVAPORATION COVER
Figure 60
WIRE TIE
H130_0135HCA
981088 – September 1995
Filling the TANKS with the Developer and Fixer Solutions
EVAPORATION COVER
FIXER RACK
H130_0135HA
69
Advertisement
Table of Contents
