5-Installing The Kodak Dental Imaging Software - Kodak 9000 Installation Manual

Chapter 5
INSTALLING THE KODAK DENTAL IMAGING
SOFTWARE
Before installing the KODAK Dental Imaging Software, check that:
•
The computer has all the PC system requirements
•
You have the software CD
To install the KODAK Dental Imaging Software, follow these steps:
1. Insert the software CD in the CD-ROM drive of the computer.
Wait for the installation program to start. If the program does not start automatically, click
Start > Run and enter D:\setup.exe if D is the letter for the CD-ROM drive, or the letter
of the relevant drive on the computer.
2. The Choose Setup Language dialog box is displayed. Select the installation language and
click OK.
3. The Kodak Dental Imaging Software welcome page and the InstallShield wizard are
displayed.
KODAK 9000 3D Extraoral Imaging System_Installation Guide (SM711)_Ed 01 5–1