Installing The User Interface Software Of The Kodak Cr 7400 System - Kodak CR 7400 Installation Manual

Section 3: Installing the User Interface Software of the KODAK CR
7400 system
Important
Before installing the software, please review the system requirements at http://www.kodakdental.com/
documentation/sysReqs/KDSIS.pdf.
Caution Caution
Do not connect the CR7400 USB cable to your computer while installing the software.
After installing the Kodak dental imaging software (version 6.6.3 and up), proceed to the steps below.
• Microsoft.NET installation. This may already be installed on the computer, in which case it is automatically
skipped.
• User interface installation
• WIBU-Key installation (Microsoft Windows 2000 and XP operating system users skip this step)
• Continuation of installation
[1] Insert the user interface software CD for the Kodak CR 7400 system into the computer disk drive.
The installation begins automatically.
Note
If the installation does not begin automatically:
• Click My Computer.
• Click CD RW drive.
• Double-click the autorun.exe file.
When the installation begins, the Kodak CR7400 System Installation screen appears:
Starting Installation
6H4130 – September 2007 9