Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
[3] Level the PROCESSOR and/or the MOUNTING STAND by using a 9/16 in. WRENCH to rotate the 4
LEVELING FEET.
[4] Repeat the procedure as necessary to level the PROCESSOR.
Adjusting the LEVELING FEET
Figure 41
[5] Once you have leveled the PROCESSOR and/or MOUNTING STAND, rotate the 4 NUTS on the LEVELING
FEET of the PROCESSOR or MOUNTING STAND to secure the desired level.
48
NUT (4)
FRONT
ACCESS
PANEL
LEVELING FOOT (4)
FLOOR PLATE (4)
H130_0147BCA
H130_0147BA
September 1995 – 981088
Advertisement
Table of Contents
