Preparing The Processor For Installation; Installing The Feed Shelf, The Detector Crossover Assembly, And The Developer Rack - Kodak X-OMAT M35 Installation Instructions Manual

Installing the Feed Shelf, the Detector Crossover Assembly, and the Developer Rack

Do not overtighten the SCREWS.
[1] Install the:
• FEED SHELF
• 4 WASHERS - No. 10
• 4 LOCK WASHERS - No. 10
• 4 SCREWS - No. 10, 32 x ⁄
FEED SHELF
FILM GUIDE
LOCK WASHER (4)
H112_0113BCB
H112_0113BA
BIN FASTENER (2)
RECEIVING
BIN
8

Preparing the Processor for Installation

1
2
SCREW (3)
SCREW (4)
TOP COVER
DEFLECTOR
[2] Install the:
• FILM GUIDE
• 3 SCREWS - No. 8, 32 x ⁄
• 3 WASHERS - No. 8
• 3 LOCK WASHERS - No. 8
• 3 NUTS - No. 8, 32
[3] Install the DEFLECTOR in the RECEIVING
BIN.
[4] Install the RECEIVING BIN on the processor
using the 2 BIN FASTENERS.
WASHER (4)
3
8
H112_0151BCA
H112_0151BC
981159