X 2.5" Front Drive Bay Module Installation (Intel® Server Chassis R2000Wfxxx And Intel® Server System R2208Wfxxxx); Figure 6. Air Duct Side Wall Installation; Figure 7. R2000Wfxxx Drive Bay Retention Bracket Removal - Intel R2000WF series Service Manual

Intel® Server System R2000WF Product Family System Integration and Service Guide
2. Install the Air Duct Side Walls
a) Locate the two black plastic air duct sidewalls from the chassis accessory kit
b) Following the illustration above, fasten down the appropriate air duct side wall onto each side of the
server board using 8 in/lbf torque for each screw. (See Letter "C")
1.3.1 8 x 2.5" Front Drive Bay Module Installation (Intel® Server Chassis R2000WFxxx and
Intel® Server System R2208WFxxxx)
Continue with the instructions in this section for installation of several available 8 x 2.5" front drive bay
accessory kits into the system. If the final system configuration does not include front drive support, proceed
to section 1.3.2
1. Remove the Drive Bay Retention Bracket
The Drive Bay Retention Bracket must be removed in order to remove the Drive Bay Filler Panels.
22

Figure 6. Air Duct Side Wall Installation

Figure 7. R2000WFxxx Drive Bay Retention Bracket Removal