bizhub C4000i/C3300i
[1]
[1]
[1]
[2]
[3]
[1]
[1]
[2] [1]
[3]
[3]
[4]
[2]
[3]
14. To reinstall, reverse the order of removal.
4.2.8 Fusing drive unit
1. Remove the fusing unit.
E.3.1.12 Replacing the fusing unit
2. Remove the toner filter assy.
E.3.1.8 Replacing the toner filter
3. Remove the rear cover.
F.4.1.3 Rear cover
4. Remove the left cover.
F.4.1.2 Left cover
5. Remove the PWB box.
F.4.2.7 PWB box
[2]
[1]
[4]
[1]
F DISASSEMBLY/REASSEMBLY > 4. bizhub C4000i/C3300i
8. Remove four screws [1], and remove the plate [2].
9. Remove five screws [1], and remove the plate [2].
10. Remove the harness from six wire saddles [1] and the edge cover [2].
11. Remove all connectors and flat cables on the backup board [3] and the base
board [4].
12. Pass the flat cable [1] through the hole [2].
13. Remove five screws [3], and remove the PWB box [4].
F-16