bizhub C4000i/C3300i
[1]
5.1.10 Cleaning of the 2nd image transfer entrance guide
1. Open the right door.
2. Remove the IDC sensor assy.
F.4.7.1 IDC sensor (IDCS1)
[1]
5.1.11 Cleaning of the IDC sensor window
1. Open the right door.
2. Remove the IDC sensor assy.
F.4.7.1 IDC sensor (IDCS1)
5.1.12 Cleaning of the duplex transport rollers
1. Open the duplex unit transport cover.
[1]
5.2 PF-P20/PF-P21
5.2.1 Cleaning the tray 2/3 pick-up roller, feed roller
1. Remove the tray 2 or tray 3.
[1]
E MAINTENANCE > 5. Cleaning/Lubrication procedure
2. Wipe the areas [1] around the waste toner collecting port clean of spilled toner
and dirt.
3. Wipe the 2nd transfer entrance guide [1] clean of dirt.
3. Wipe the IDC sensor window [1] clean of dirt.
2. Using a cleaning pad dampened with alcohol, wipe the duplex unit transport
roller [1] clean of dirt.
E-19