Advertisement
bizhub C4000i/C3300i
Function Name
External Memory
Specify whether to allow users to print and read files
Function Settings
from a USB memory device and to save files to a USB
memory device.
12.2.3 Driver Password Encryption Setting
• To set whether to use the factory default encryption word or user-defined one as a common key that encrypts a password used for a print
job.
Setting item
User-Defined
To set the encrypting passphrase. Enter an encryption word of 20 letters.
Use Factory default
Uses the factory default encryption word (undisclosed predefined encryption key).
settings
NOTE
▪ When selecting [User-Defined], set an encryption key being consisted of the same letters in the printer driver. If the encryption
word set in the machine differs from the encryption key set in the printer driver, different encrypted passwords are created and
printing cannot be made.
▪ The use of OpenAPI allows an encryption key to be obtained from the machine.
12.2.4 Quick Security Setting
Administrator Password
• To set and change the administrator password.
NOTE
▪ When "Enable" is selected in [Admin.] -> [Security] -> [Security Details] -> [Password Rules], the following passwords cannot be
accepted: password of single repeated characters, password same as the one before being changed, and password where the
number of characters is less than the minimum number specified in [Set Minimum Password Length].
<Procedure>
1. Enter the current administrator password
2. Password: Enter the new administrator password to be used
3. Password Confirmation: Re-enter the new administrator password
USB Enable Settings
• Specify whether to permit a function that requires the USB Port.
Setting item
Print Document (*1)
Print (*2)
• *1: This function is available when [ON] is selected in [Admin.] -> [Security] -> [USB Connection Permission setting] -> [Detail Setting] ->
[External Memory (User)].
• *2: This function is available when [ON] is selected in [Admin.] -> [Security] -> [USB Connection Permission setting] -> [Detail Setting] ->
[PC Connection].
Password Rules
• To apply the password rule to enhance Security.
• Passwords to be covered:
• CE password, administrator password, user password, account track password, public user box password, user box administrator
password, Security for confidential documents, WebDAV server password, SNMPv3 Write User password, remote panel server
password, Encryption Passphrase
• Details of the password rules:
• Minimum number of characters specified in [Set Minimum Password Length] (Default: 12 characters)
• Upper- and lower-case letters are distinguished in alphabetical letters.
• Only one-byte symbols can be used.
• Password with only the same letter is prohibited.
• Password same with the one prior to change is prohibited.
NOTE
▪ When the password rule is set to [Enable], the password cannot be changed or registered unless it follows the above conditions.
Setting item
Enable
To apply the password rules.
Disable
Do not apply the password rules.
When [Enable] is selected, it is possible to determine the minimum number of characters that a
password can contain. (8 to 64 characters, Default: 12 characters)
Contents
Select whether to allow users to print files from USB memory.
Select whether to enable to print files from a USB-connected computer.
H UTILITY MODE > 12. Supplementary explanation of utility mode
Default setting
Save Document:
Restrict
Print Document:
Allow
External Memory
Document Scan:
Restrict
Contents
Contents
Contents
H-26
When Enhanced Security mode is set to
"ON"
Restrict (not to be changed)
Restrict (not to be changed)
Restrict (not to be changed)
Setting
value
Allow
Restrict
Allow
Restrict
Default
setting
○
Default
setting
○
○
Default
setting
○
Advertisement
