bizhub C4000i/C3300i
Repair
Repair/Request
Request Code
Repair
Repair Code
13. Touch [Apply].
Repair
Repair/Request
Request Code
Repair
Repair Code
14. After repair is completed, the machine restarts automatically.
1.6.4 Initialize
• To initialize license management information.
• To be used when license management information cannot be repaired.
• License management information should be initialized when the machine fails to generate request code or repair request code due to any
trouble and the information cannot be repaired.
NOTE
▪ You need to access License Management System (LMS) to implement each function setting.
▪ When license management information cannot be repaired, initialize the information with the following procedure.
<Procedure>
1. Contact the license management section of sales company to report the information necessary to issue the initialize code.
2. The license management section of sales company supplies the initialize code.
3. Call the Billing Setting to the screen.
4. Touch [License Management] -> [Initialize].
5. Enter the initialize code issued by call center using the keyboard on the screen, and touch [Apply].
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 1. BILLING
12345-67890-12345-67890-12345-67890-12345
J-15
SETTING