bizhub C4000i/C3300i
[4]
[2]
[3]
[1]
[3]
[2]
[2]
[1]
8. To reinstall, reverse the order of removal.
4.6.2 Toner suction fan (FM2)
1. Remove the toner filter assy.
E.3.1.8 Replacing the toner filter
2. Remove the rear cover.
F.4.1.3 Rear cover
3. Remove the left cover.
F.4.1.2 Left cover
4. Remove the PWB box.
F.4.2.7 PWB box
[3]
[2]
[2]
[3]
[1]
9. To reinstall, reverse the order of removal.
4.7 Others
4.7.1 IDC sensor (IDCS1)
1. Open the right door.
4. Remove two screws [1].
5. Remove the claw [2] from the hole [3] in the main body, and remove the
6. Remove the harness from the harness guide [1].
7. Remove two screws [2], and remove the machine cooling fan [3].
5. Disconnect the connector [1].
[2]
6. Remove three screws [2], and remove the toner suction fan assy [3].
[1]
7. Remove the harness from the harness guide [1].
8. Remove two screws [2], and remove the toner suction fan [3].
F DISASSEMBLY/REASSEMBLY > 4. bizhub C4000i/C3300i
machine cooling fan assy [4].
F-31