Advertisement
bizhub C4000i/C3300i
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS
1. BILLING SETTING
1.1 Outline
Starting procedure
1. Call the initial screen of Service Mode.
2. Press the following keys in this order.
• Stop -> 9
3. Call the Billing Setting screen.
An example of the Billing Setting screen
Exiting procedure
1. Touch [Exit].
2. Turn OFF the main power switch. Wait 10 seconds, then turn ON the main power switch again.
1.2 Counter Setting
1.2.1 Total Counter Mode
• To set the counting method for the total counter.
Setting item
Mode 1
Mode 2
Count-up table
Total Counter mode
Print mode
Mode 1
1-Sided
2-Sided
Mode 2
1-Sided
2-Sided
1.2.2 Large Size Counter Mode_A4
• To set the size regarded as the large size.
Setting item
No count
No count the large size counter.
1
8
/
x 14
When it exceeds 215 mm in the main scan direction and 355 mm in the sub scan direction (exceeds
2
337 mm at fax scan), it is regarded as the large size.
1
/8
/
x 14/Foolscap
When it exceeds 203 mm in the main scan direction and 330 mm in the sub scan direction (exceeds
2
313 mm at fax scan), it is regarded as the large size. (However the size in the main scan direction
changes according to the foolscap size setting.)
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 1. BILLING
1 count per copy cycle
Large size is double counts
Paper size
Except for large size
Large size
Except for large size
Large size
Except for large size
Large size
Except for large size
Large size
Contents
Total
Large size
1 count
0 count
1 count
1 count
2 count
0 count
2 counts
2 counts
1 count
0 count
2 counts
1 count
2 counts
0 count
4 counts
2 counts
Contents
J-1
SETTING
Default setting
○
2-Sided Total
0 count
0 count
1 count
1 count
0 count
0 count
1 count
1 count
Default
setting
○
Advertisement
