Advertisement
bizhub C4000i/C3300i
6.3.16 Default Bypass Paper Type Setting
Key name
Default Bypass Paper Type
Setting
6.3.17 Page Number Print Position
Key name
Page Number Print Position
6.4 Security
Key name
Certificate Verification Settings
Restrict User Access
Auto Logout
Administrator Password Setting When [Administrator] -> [Security] -> [Security Details] -> [Password Rules] is enabled, the following
Administrator Security Levels
Security Details
Quick Security Setting
-
-
-
Biometric/IC Card
• It will not be displayed when [Service Mode] -> [Billing Setting] ->
Information Registration
• If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "ON,"
Synchronize User
Authentication / Account
Track By User
• The [Biometric/IC Card Information Registration] key displays if [Authentication
Changing Job Priority
Delete Other User Jobs
• The [Synchronize User Authentication / Account Track By User] key displays
-
passwords cannot be accepted: password of single repeated characters, password same as the one before
being changed, and password where the number of characters is less than the minimum number specified in
[Set Minimum Password Length].
It will not be displayed when [Service Mode] -> [Billing Setting] -> [Management Function Choice] is set to
"Vendor 2."
Password Rules
• This setting cannot be enabled when [Service Mode] -> [Enhanced Security] ->
• If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "ON,"
• When the password rule is enabled, the password cannot be changed or
ProhibitFunctions
• If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "ON,"
• For details of the functions, refer to "
Print Data Capture
• To be used when carrying out [Service Mode] -> [System 2] -> [Data Capture].
• If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "ON,"
Personal Data Security
-
Settings
Initialize
-
Web browser contents
-
access
Remote Service setting When "Allow" is selected, [Administrator] -> [Network] -> [Machine Update Settings]
-> [Machine Auto Update Settings] -> [Auto Update Settings for This Machine] will
not be displayed.
Web browser setting
-
change
Maintenance Mode
To "Allow" Maintenance Mode Access, set [Service Mode] -> [System 2] ->
Access
[Maintenance Mode] to "Effective."
Write the Configuration
-
from USB
Storage data backup
• To set whether to permit our service representative to back up or restore the
• For details of the functions, refer to [Service Mode] -> [Enhanced Security] ->
Hide Personal
If [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "ON," disabling
Information (MIB)
this setting cancels enhanced security mode.
For details of the functions, refer to "
Function/Precondition
Function/Precondition
Function/Precondition
[Management Function Choice] is set to "Vendor 2."
selecting [Allow] for [Registering and Changing Addresses] cancels enhanced
security mode.
Device2] is mounted via [Service Mode] -> [Billing Setting], and [Administrator]
-> [User Auth/Account Track] -> [Authentication Type] -> [User Authentication]
is set to "ON (MFP)."
when [Administrator] -> [User Auth/Account Track] -> [Authentication Type] ->
[Synchronize User Authentication / Account Track] is set to "Synchronize by
User."
[CE Authentication] is set to "OFF." "OFF" cannot be set for [CE Authentication]
when [Password Rules] is enabled.
disabling this setting cancels enhanced security mode.
registered unless it follows the above conditions.
selecting "Mode1" in this setting cancels enhanced security mode. Only the
number of times for trials up to the access lock can be changed.
enabling this setting cancels enhanced security mode.
storage on this machine.
[HDD Data Backup].
H.12.2.4 Quick Security
H-11
H UTILITY MODE > 6. Administrator
H.12.2.1
ProhibitFunctions."
Setting."
Advertisement
