bizhub C4000i/C3300i
(2) All Areas
Use of controls, adjustments or performance of
procedures other than those specified in this
manual may result in hazardous radiation
exposure.
Maximum power of the laser diode
Wavelength
3.5.3 Laser Safety Label
A laser safety label is attached to the outside of the machine as shown below.
3.5.4 Laser Warning Label
A laser warning label is attached to the inside of the machine as shown below.
3.5.5 PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT
▪ Be sure to unplug the power cord whenever performing a service job in the laser beam path
(around the PH unit).
A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY WARNINGS
WARNING
semiconductor laser
A-21
25 mW
770 to 800 nm